Parameters Monitored CO2 Sample Rate: Technique: Range: Accuracy: Rise Time: Respiration Rate Range: Accuracy: Anaesthetic Agents Technique: Range: Accuracy: Calibration: Alarm Limits Ranges ETCO2 High:     Resp. Rate:     Inspired CO2:     Agent:   Serial Output:   Power: Physical: Weight: Environment Temperature:   Relative Humidity:   Atmospheric Pressure:

End Tidal CO2, Inspired CO2, Respiration Rate Anesthetic Agents Halothane,Isoflurane and Sevoflurane,   150mL/min+ 20ml/min Non dispersive Infrared Spectroscopy 0-100mmHg, 0-13.3kPa, 0-10% +2 mmHg or 4% of reading, whichever is greater, 0-10% CO2, from 0-36 breaths/min 400ms (150ml/min flow)   0-150 breaths/min + 1 breath/min (from 0-120 breath/min)   Piezoelectric Crystal Resonance 0-8% Isoflurane, Halothane and Sevoflurane The greater of + 10% of reading or +0.2% from 0-6% accuracy outside of range is unspecified High/Low calibration required every 100 hours of operation   0-100 mmHg (1mmHg steps) and OFF 0-13.3 kPa (0.1 kPa steps) 0-10.0% CO2 (0.1% steps) Low: 0-100 mmHg (1mmHg steps) and OFF Defaults: High = 60 mm Hg, Low = 20 mmHg High: 5-150 bpm (1bpm steps) and OFF Low: 5-150 bpm (1bpm steps) and OFF Defaults: High = 35 bpm Low = 5 bpm   High: 0-100 mmHg (1 mmgH steps) and OFF 0-13.3 kPa, 0.1 kPa steps 0-10.0% CO2, 0.1% steps Default: 8 mmHg High: 0.0-8.0% (0.1 steps) and OFF Low: 0.0-8.0% (0.1 steps) and OFF Defaults: High = OFF, Low = OFF RS232C Data Format 9600 baud, 1 start bit, 8 data bits, 1 stop bit no parity Text only, no graphics. Patient data log AC Supply Input of 200~240 VAC, 50/60Hz Output of 24 VDC @ 1.3A with 4kV isolation Dimensions Width:10.0” (2.4 cm) Height: 5” (8.9 cm) Depth: 5.5” (14.0 cm) Approximately 2.2 Kg (5 pounds) Anesthetic Agents Operating 15-30º C. Other Parameters Operating 0-50º C Storage:-40 to 70º C Operating: 15-95% (non-condensing) Storage:10 to 95 % 600mmHg to 760mmHg (0 to ~6,000 ft altitude)

Specifications subject to change without notice