V3404 Specification

Displays

Temperature

Display
Resolution

Electroluminescent
160x80 pixels

Range

0 to 60 °C, 32 to 140 °F

Waveforms
Graphics Trends

ECG, Plethysmogram
SpO_2,Pulserate(Heart rate)
& pulse Signal Strength

Accuracy

+/-1 °C

SpO₂

3 digit (LED display)
0.56" (14.2mm) High

Display

3-digit 10X14 pixel font (EL Panel), update rate = 1Hz,Splits time on screen with respiration, when on.

Pulse rate/
Heart rate (ECG)

3 digit (LED display)
0.43" (10.9mm) High

Alarms

No alarms for temperature

Pulse Strength

Logarithmically scaled 10 segment LED bar graph

Range

Sensitivity level 100, used for larger animalsSensitivity level 10, used for small animals

Indicators

Low Battery

"LOW BATTERY" message when 30 minutes of battery life remains

Rate

5 to 150 BrPM (breathes per minute)

Audio Disabled

SILENCED BELL icon indicates temporary or indefinite status

Accuracy

> of +/-2% or +/-2 BrPM over full range

Asystole Alarm

ALARM LED will flash, ASYSTOLE message on screen

Bandwidth

0.16 to 2 Hz

SpO₂Sensor

Message indicates sensor problem

Minimum Signal

10mL (Volume of air passing thermistor)

SpO₂Search

Message indicates monitor is searching for a pulse

Display

3-digit 10X14 pixel font (EL Panel)(update rate = 1Hz)Splits time on screen with temperature, when on.

Artifact

Message indicates presence of excess motion or other artifacts

Dimensions

3.5"x 10"x5.5" HWD
88.9 x 139.7 x 254mm

ECG/Lead Fail

Message indicates a lead disconnect condition

Weight

5lb (2.27Kg)

Charge

Green LED indicates external power and battery is charging

AC charger

230v, 50/60Hz

Pace Detect

A line appears on screen when pacemaker signal is present

Battery Life

Standard Lead Acid
Internal Rechargeable

SpO₂
Range

0-100%

1.5 hours of continuous use,fully charged in 6 hours

Accuracy

±2 @ 70-100%, ±3 @ 50-69%

Printer Output

Serial/Analog
RS232 Serial output of data

Averaging

4, 8, 16 Beat Average

Optional digital (remote alarm) interface

Alarms

Low 50 – 100% and Off
High 50 – 100% and Off

Printer (optional)

Stock code V3408 provides data log trends & waveform printouts

Pulse rate SpO₂or heart rate (ECG)

Environmental Specifications

Range
Accuracy

20-350 bpm
±1 beat or 2% whichever is greater

Operating Temp.

0°C-55°C

Averaging

8 or 16 Second Average

Storage Temp.

- 40°C to 75°C

Alarms

Low 20 - 350 bpm and Off
High 20– 350 bpm and Off

Relative Humidity
(non condensing)

10- 95% (Storage)
15- 95% (Operating)

ECG

Safety Standards

Configuration

3 lead standard or
5 lead optional extra

Safety

EN60601-1,EN60601-1-1, UL544, CSA Srd.C22.2 No.125-1984

Lead Selection
Gain

I, II, III, aVR, aVL, aVF and V
x1, x2, x4, x8

EMC

EN60601-1-2
ISO9001 Certified

Pace Detect
Pace Reject

Yes
Yes

Trends

17 hours@ 30 second intervals

Sweep Speed

12.5, 25 or 50mm/Sec

Stock Code

V3404

*Displays*		*Temperature*
Display Resolution	Electroluminescent 160x80 pixels	*Range*	0 to 60 °C, 32 to 140 °F
Waveforms Graphics Trends	ECG, Plethysmogram SpO_2,Pulserate(Heart rate) & pulse Signal Strength	Accuracy	+/-1 °C
SpO₂	3 digit (LED display) 0.56" (14.2mm) High	Display	3-digit 10X14 pixel font (EL Panel), update rate = 1Hz,Splits time on screen with respiration, when on.
Pulse rate/ Heart rate (ECG)	3 digit (LED display) 0.43" (10.9mm) High	Alarms	No alarms for temperature
Pulse Strength	Logarithmically scaled 10 segment LED bar graph	Range	Sensitivity level 100, used for larger animalsSensitivity level 10, used for small animals
*Indicators* Low Battery	"LOW BATTERY" message when 30 minutes of battery life remains	Rate	5 to 150 BrPM (breathes per minute)
Audio Disabled	SILENCED BELL icon indicates temporary or indefinite status	Accuracy	> of +/-2% or +/-2 BrPM over full range
Asystole Alarm	ALARM LED will flash, ASYSTOLE message on screen	Bandwidth	0.16 to 2 Hz
SpO₂Sensor	Message indicates sensor problem	Minimum Signal	10mL (Volume of air passing thermistor)
SpO₂Search	Message indicates monitor is searching for a pulse	Display	3-digit 10X14 pixel font (EL Panel)(update rate = 1Hz)Splits time on screen with temperature, when on.
Artifact	Message indicates presence of excess motion or other artifacts	*Dimensions*	3.5"x 10"x5.5" HWD 88.9 x 139.7 x 254mm
ECG/Lead Fail	Message indicates a lead disconnect condition	*Weight*	5lb (2.27Kg)
Charge	Green LED indicates external power and battery is charging	*AC charger*	230v, 50/60Hz
Pace Detect	A line appears on screen when pacemaker signal is present	*Battery Life*	Standard Lead Acid Internal Rechargeable
*SpO₂* Range	0-100%		1.5 hours of continuous use,fully charged in 6 hours
Accuracy	±2 @ 70-100%, ±3 @ 50-69%	*Printer Output*	Serial/Analog RS232 Serial output of data
Averaging	4, 8, 16 Beat Average		Optional digital (remote alarm) interface
Alarms	Low 50 – 100% and Off High 50 – 100% and Off	*Printer (optional)*	Stock code V3408 provides data log trends & waveform printouts
*Pulse rate* *SpO₂or heart rate (ECG*)		*Environmental Specifications*
Range Accuracy	20-350 bpm ±1 beat or 2% whichever is greater	Operating Temp.	0°C-55°C
Averaging	8 or 16 Second Average	Storage Temp.	- 40°C to 75°C
Alarms	Low 20 - 350 bpm and Off High 20– 350 bpm and Off	Relative Humidity (non condensing)	10- 95% (Storage) 15- 95% (Operating)
*ECG*		*Safety Standards*
Configuration	3 lead standard or 5 lead optional extra	Safety	EN60601-1,EN60601-1-1, UL544, CSA Srd.C22.2 No.125-1984
Lead Selection Gain	I, II, III, aVR, aVL, aVF and V x1, x2, x4, x8	EMC	EN60601-1-2 ISO9001 Certified
Pace Detect Pace Reject	Yes Yes	Trends	17 hours@ 30 second intervals
Sweep Speed	12.5, 25 or 50mm/Sec	*Stock Code*	V3404