Surgeon Scrub Sinks

	Easy installation - No wall chasing! Deep and wide tub Spout or lever mixer options Single or double bay versions Both our single and double station sinks feature a 10" (25cm) deep tub and 12” (30cm) high backsplash. The sink is made from heavy gauge 304 grade stainless steel, heli-arc welded for superior strength and is finished in a uniform non glare finish. The sink will accomodate either lever mixer taps or gooseneck spout (as illustrated). These are sold separately. Installation Surgical scrub sinks are supplied with wall support brackets on each side and a fixing bracket behind the backsplash. If you intend to fit the sink to a stud partition wall ensure that the wall has sufficient battens in place to provide a secure fixing. There is no need to chase out the wall behind the scrub sink to accomodate the supply pipes, the backsplash has been designed so they can be run behind it, making the installation much easier. UK Water Regulations The installation must comply with the Water Supply (Water Fittings) Regulations 1999. For information about this regulation contact The Water Regulations Advisory Scheme on 01495 248454, email info@wras.co.uk or use the link below to visit their website.	Ordering Information Single Bay 30"x19"x22.56” (76.20x48.26x57.30cm) Stock code 115-252 Double Bay 48"x19"x22.56” (21.92x48.26x57.30cm) Stock code 115-253 Sink Drain Fitting Stock Code 115-301 Foot operated lever Stock code 115-255 Lever mixer taps Stock Code 115-260
Foot Pedal Valve Sink Drain Fitting	Foot Pedal Valve Allows you to turn the water on and off without using your hands and risking contamination. Drain Fitting Standard 1 1/2" drain fitting with grate. Please note that a plug cannot be fitted to this item as surgical scrubs sink should not be able to fill with water. Water Temperature Foot pedal valves cannot provide consistent water temperature control if the supply temperature can vary. We recommed that you install a thermostatic water control valve which can be obtained from all good plumbing suppliers. Lever Mixer Taps High quality polished chrome finish, 6" levers and hard wearing ceramic valve seats. Suitable for use from low pressure supplies (tank fed).