Li-fort Infusion Warmer

A vital aid to prevent hypothermia during anaesthesia that will consistently maintain fluid temperature during infusions. The Li-fort can be used with virtually any giving set with a o.d. of between 4 and 5mm. The unit is supplied with a hanging strap to enable it to be attached to a transfusion stand hook. Warming performance Heat is conducted from the groove of the heating plate to the fluid inside the tube. The temperature of the heating plate is always controlled at 46oC by the temperature sensors. Typically this means that the fluid is warmed to approximately 30ºC to 41ºC dependant on the flow rate, tube length and ambient temperature. Flowrate range 0 to 7ml/min. Safety Mechanism 1) Temperature sensors monitor the temperature of the heating plate and the fluid to prevent overheating. 2) Secondary thermostatic fuse cuts off the power supply if the temperature sensores do not work. Power requirements Supplied with a 3 metre mains cable. 220-240v AC 50/60Hz Ordering information Stock code 129-200 Li-fort infusion warmer