Cardipia 200 Technical Specifications

The Cardipia 200 is a low priced non interpretive ECG recorder that has all the capabilities you need to make accurate determinations.. The unit can be power from the mains or built in rechargeable battery. It has an LCD display for operational messages and alarms. Parameters can be easily changed from the straight forward control panel.

Recording Channel: Recording System: Recording Format: Recording sensitivity: Recording Speed: Recording Paper: Display: Paper Sensor: Electrode Sensor: ADC Sampling: ADC sampling Rate: CMRR Input Impedance: Frequency Response: Filtered: Unfiltered: Calibration Test: Recording Leads: Auto power off: Defibrillator Protection: Power requirements: Size: Weight:

3, 1 channel High resolution thermal printer with 8 dots/mm Automatic 6 lead recording as a group I (I,II,III), aVR(aVR,aVL,aVF) and manual 1 channel recording 5, 10, 20mm/ mV +/-5% 25 or 50mm per second 63mm x 30 metre roll LCD 16 character x 2 lines When paper is used up, recording stops automatically and the alarm message is displayed. When electrodes are off, the alarm message is displayed and a flat line is printed. 10 bits 500Hz > 100dB > 40 MOhms To reduce baseline drift, EMG & AC interference 0.5 ~ 30Hz (-3dB) 0.05 ~ 150Hz (-3dB) Frequency response test using 1mV 6 standard leads (I,II,III,aVR,aVL, aVF) 5 minutes from last standby operation 5000v, EN/IEC 60601-2-25 requirements 100~240v 50/60Hz , built in 24v NiCd battery 25cm x 31cm x 9cm 2.6Kg