Large Animal Anaesthesia System

LDS 3000 Large Animal anaesthetic machine The LDS 3000 Large Animal Anaesthesia System was specifically designed to eliminate resistance. The absorber canister is designed to allow the expired gas to flow evenly and unobstructed through the canister. Because of the port size throughout the circuit, resistance is far less than other machines in the veterinary market. The directional valves are stacked. The Stack-Valve™ design reduces resistance by eliminating directional flow reducing the distance air must travel. Each valve has its own valve disc with a cage that allows the disk to lift without any interference. The flush valve activates oxygen flow and permits fresh gas to enter through a separate port at the inspiratory opening, eliminating back pressure on the vaporiser. The close proximity of the fresh gas and the oxygen flush to the inspiratory opening, allows fresh gas to reach the patient more rapidly. Supplied with: Two 64-inch black hoses (2" diameter), stainless steel Wye piece with luer fitting for end tidal CO2 monitor connection, 30-litre breathing bag, 3 metre oxygen supply hose with BS Schrader probe end, operations manual. Vaporiser sold separately.	The LDS 3000 is designed to be mounted on a cart or table mounted. As standard the unit is intended to be connected to a piped oxygen supply however, regulators are available if you wish to use cylinders.
Foal Breathing Tubes Set and Absorber for LDS3000 The foal breathing tubes set option permits the LDS 3000 Large Animal Machine to be used on foals, calves, small ruminants and other species too large in size for conventional small animal anesthetic machines. An optional small absorber canister is available to replace the large canister when used with foals and other similar sized animals.
DHV 1000 Large Animal Ventilator The DHV 1000 is designed to provide controlled ventilation to an anesthetized patient while connected to an appropriate large animal anaesthesia machine such as the LDS 3000. The ventilator is electronically controlled, pneumatically powered and on a timed cycle of your choosing. The DHV 1000 is compact, well balanced and durable. The controls consist of: on/off, tidal volume, breaths per minute, inspiratory time, flow control and patient pressure. A ventilator/ anaesthesia machine cart, which is available as an accessory is recommended. DHV1000 is supplied with: 3 metre O2 hose w/schrader connector, 42- inch bag port to vent hose (2" diameter), set up video ,operations manual. The unit as standard is designed to be driven from either a piped oxygen or medical air gas supply however, regulators are available if you wish to use cylinders.
Equi-Vent Large Animal Anaesthesia System The LDS 3000 and DHV 1000 are available as a complete system mounted on a robust mobile cart. The picture right also includes an optional swing out monitoring shelf and vaporiser which are supplied separately. Ordering information Stock Code Description V7025 LDS 3000 Anaesthetic Machine V7275 DHV 1000 Ventilator System V7276 Mobile Cart for LDS 3000 / DHV 1000 V7277 Optional Swing Out Shelf for Monitor 102-220 Oxygen regulator with schrader valve for use with E or J size cylinders. 102-230 Oxygen regulator with schrader valve for use with F or G size cylinders. V7138 Foal breathing tubes set for LDS 3000 V7140 Foal absorber canister for LDS 3000